PreguntasLinux

Hola a todos, soy completamente novato en esto de los sistemas linux y necesito ayuda ya estoy a punto de desintalarlo.

Hace unos dias instale en mi computadora el ubuntu 6.10 edgy y no logro conectarme a internet por motivos de que no se como instalar el modem.

Mi modem es un SpeedTouch 330, color gris, Thomson, entonces la informacion es VPI=1 VCI=32 Tipo RFC 1483B, version del modem es (saque la informacion del ubuntu) P: vendor=06b9 ProID=4061 Rev=4.00, S: Manufacturer= THOMSON.

Ahora sucede que en internet hay mucha informacion de como conectarlo pero en todo lo que he leido hace mencion de escribir usuario y contraseña, pero el asunto es que yo en mi conexion a internet no necesito introducir usuario ni contraseña o sea cuando se carga mi sistema windows ya estoy conectado a internet, hasta donde tengo entendido no es pppoA o pppoE.
NOTA: SOY DE PANAMA Y MI ISP ES CABLE & WIRELESS

Ubuntu se carga bien, las luces del modem estan verdes sin parpadear, las especificaciones de mi computadora es PLACA MADRE: ASROCK P4VM8 PROCESADOR CELERON 2.26 GHZ, 1024MB DE RAM, DOS DISCOS DURO SEAGETE UNO DE 200GB DONDE TENGO WIN XP PRO Y EL OTRO DE 40GB DONDE TENGO UBUNTU. TARJETA DE VIDEO GEFORCE INNO 3D NVIDIA 6200.
POR FAVOR AYUDENME, YA QUE HASTA AHORA NO HE CONSEGUIDO INFORMACION AL RESPECTO.

Por lo que pude averiguar, sobre CABLE & WIRELESS (ISP de PANAMA) ..

tienen una solución Cisco: "Plataforma de Línea Digital de Suscriptor Asíncrona (ADSL), basada en DSLAMS 6260 y agregadores 6400"

http://www.cisco.com/web/LA/cisco/exito/...eless.html

El servicio se llama Freedom ADSL, pudiendo ser:
Freedom ADSL Ethernet o Freedom ADSL Plug & Play

http://www.cwpanama.com/cwp/Residencial/...encial.htm

Doc.: http://www.cwpanama.com/cwp/Soporte/Soporte.htm
En este manual, sobre un modem USB, indica los circuitos virtuales que tú mencionaste ver en tu ubuntu (VPI=1 VCI=32 ) y tambien usuario y contraseña:

"Establece una conexión permanente entre
el usuario y Cable & Wireless Panamá
mediante el uso de un nombre de usuario y
contraseña. La diferencia de una conexión
dial-up convencional es que la misma
requiere llamar para lograr una conexión"

http://www.cwpanama.com/nr/cwp/documento..._DLink.pdf

Muy probablemente fuerona tu casa y ellos te lo instalaron y/o te dieron un CD de autoinstalacion para windows.
Creo deberias llamar a soporte para que te aclaren sobre éste punto.
Te digan cual es tu nombre y contraseña.
De paso confirma los VPI/VCI y el protocolo debe ser PPPoE, pero verfícalo.

Luego seguir [howto] ST330 ubuntu 6.06 > pppoe microcod.:4

p_eter te agradezco la informacion hare lo correspondiente y luego comento lo sucedido.
gracias

rolando,
te secuestraron los de CW ?
cuéntanos, please!

p_eter les hice la consulta a los CWP y lo que me contestaron es que yo no necesito de usuario y contraseña para la conexion a internet y que ellos dan solo soporte para windows y no para LINUX, asi que quedo en lo mismo.

En fin, medio raro.
Lo único que se me ocurre es seguir el howto antes mencionado http://www.preguntaslinux.org/showthread.php?tid=2776
y mediante prueba y error afines el tiro. Te llegaron a decir si era PPPoE? de última pruebas con uno y luego con el otro protocolo.
Y si no requiere usuario y contraseña , puedes obviar lo referente a secrets (tampoco te afectará si lo haces)

Código:
echo "nombredelusuario@isp" "*" "contraseña" > secrets

Código:
sudo install -m 600 secrets /etc/ppp/chap-secrets &&
sudo install -m 600 secrets /etc/ppp/pap-secrets

Sobre el Firmware (variante):
La otra opción podría ser basada directamente en el microcódigo que tienes corriendo en win, seguramente provisto por CWP (incluso en CD tal vez), por si ellos lo modificaron especialmente.

Está descrito en
[tip] Una manera fácil para instalar Speedtouch 330 en Linux
http://www.preguntaslinux.org/showthread.php?tid=2809
...
tomen el CD de instalación de su SpeedTouch y busquen estos dos archivos: zzzlp1.eni y zzzlp2.eni, copiénlos (yo los puse en /root/gus) en su máquina y renómbrenlos como speedtch-1.bin y speedtch-2.bin

luego los copias a /lib/firmware:

sudo cp speedtch* /lib/firmware
...

El mismo tip pero basando en el otro método (mode driver) fué descrito en
[howto] Instalar driver modem Adsl SpeedTouch 330 usb sobre linux
http://www.preguntaslinux.org/showthread.php?tid=543
(usando alcaudsl.sys en el sistema win instalado)

Estas son las alternativas que se me ocurren, otra no le veo.
Será cuestión de ir probando con mucha paciencia.

Hola. Yo también vivo en Panamá y uso el ADSL Freedom de CW. Yo logré echarlo a andar en un viejo Mac con OSX y por lo que vi el Freedom plug and play trabaja con el protocolo RFC-1483 (trata al modem como una placa de red virtual por lo que no se usa nombre/pass) y no con PPPoE/PPPoA como dijeron arriba. El que trabaja con PPPoE y nombre/pass son el freedom prepago (usas tarjetas de prepago para usar el internet) y nocturno (gratis si te metes de noche, te cobran un ojo si te metes de día).

Estamos hablando del modem speedtouch 330, no?
Sería interesantísimo que dieras mas detalle,..¿ que driver utiliza ?
¿Experiencias con algun Linux?

Desde ya, gracias y saludos

Saludos a todos. Aqui un panameño mas bajo la tirania de cable & wireless.

Estoy usando Ubuntu fiesty fawn (7.04) y no puedo hechar a andar el modem usb con el linux.

Para los usuarios del adsl ilimitado no tenemos contraseña. Se conecta por rfc 1438 B (o bridged ethernet) el cual es parecido al PPPoE pero mas basico, no usa ningun protocolo de autenticacion. Mi modem es un speedtouch thomson color gris.

Cree los archivos speedtch-1.bin y speedtch-2.bin a partir del cd de instalacion como mencionan aqui. http://www.preguntaslinux.org/tip-una-ma...-2809.html

Y segui las instrucciones de esta pagina http://www.linux-usb.org/SpeedTouch/ubuntu/index.html. Ya instale tambien el litatm. pero sin poder conectarme.

Al reiniciar las luces parpadean 9 veces por lo que parece que el firmware a cargado correctamente. Pero hasta ahi , no se que mas hacer.

A ver si alguien me da luces de que mas puedo hacer.

Aqui estan los logs que tengo:

syslog

Cita:

Aug 4 23:02:01 aldo-desktop gconfd (aldo-5255): Finalizando
Aug 4 23:02:01 aldo-desktop gdm[4899]: Reiniciando el equipoâ€¦
Aug 4 23:02:04 aldo-desktop init: tty4 main process (4283) killed by TERM signal
Aug 4 23:02:04 aldo-desktop init: tty5 main process (4284) killed by TERM signal
Aug 4 23:02:04 aldo-desktop init: tty2 main process (4287) killed by TERM signal
Aug 4 23:02:04 aldo-desktop init: tty3 main process (4289) killed by TERM signal
Aug 4 23:02:04 aldo-desktop init: tty1 main process (4290) killed by TERM signal
Aug 4 23:02:04 aldo-desktop init: tty6 main process (4291) killed by TERM signal
Aug 4 23:02:09 aldo-desktop exiting on signal 15
Aug 4 23:03:48 aldo-desktop syslogd 1.4.1#20ubuntu4: restart.
Aug 4 23:03:48 aldo-desktop kernel: Inspecting /boot/System.map-2.6.20-15-generic
Aug 4 23:03:48 aldo-desktop kernel: Loaded 24975 symbols from /boot/System.map-2.6.20-15-generic.
Aug 4 23:03:48 aldo-desktop kernel: Symbols match kernel version 2.6.20.
Aug 4 23:03:48 aldo-desktop kernel: No module symbols loaded - kernel modules not enabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] sanitize start
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] sanitize end
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() type is E820_RAM
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() type is E820_RAM
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] 0MB HIGHMEM available.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] 511MB LOWMEM available.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] found SMP MP-table at 000f5490
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Zone PFN ranges:
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] DMA 0 -> 4096
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Normal 4096 -> 131056
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] HighMem 131056 -> 131056
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] early_node_map[1] active PFN ranges
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] 0: 0 -> 131056
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] On node 0 totalpages: 131056
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] DMA zone: 0 pages reserved
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Normal zone: 991 pages used for memmap
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Normal zone: 125969 pages, LIFO batch:31
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] DMI 2.2 present.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: RSDP (v000 VIAP4M ) @ 0x000f6ec0
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: RSDT (v001 VIAP4M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: FADT (v001 VIAP4M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: MADT (v001 VIAP4M AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6ac0
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: DSDT (v001 VIAP4M AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Processor #0 15:4 APIC version 20
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: IRQ0 used by override.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: IRQ2 used by override.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: IRQ14 used by override.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] ACPI: IRQ15 used by override.
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000 1-grin

ec00000)
Aug 4 23:03:48 aldo-desktop kernel: [ 0.000000] Detected 2814.393 MHz processor.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.212829] Built 1 zonelists. Total pages: 130033
Aug 4 23:03:48 aldo-desktop kernel: [ 26.212836] Kernel command line: root=UUID=40930041-728a-434f-adaf-517c7b76611d ro quiet splash
Aug 4 23:03:48 aldo-desktop kernel: [ 26.213015] mapped APIC to ffffd000 (fee00000)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.213018] mapped IOAPIC to ffffc000 (fec00000)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.213022] Enabling fast FPU save and restore... done.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.213025] Enabling unmasked SIMD FPU exception support... done.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.213044] Initializing CPU#0
Aug 4 23:03:48 aldo-desktop kernel: [ 26.213157] PID hash table entries: 2048 (order: 11, 8192 bytes)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.214585] Console: colour VGA+ 80x25
Aug 4 23:03:48 aldo-desktop kernel: [ 26.215103] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.215492] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227801] Memory: 508480k/524224k available (1992k kernel code, 15192k reserved, 893k data, 328k init, 0k highmem)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227813] virtual kernel memory layout:
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227814] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227816] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227817] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227818] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227819] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227820] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227821] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.227825] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.304946] Calibrating delay using timer specific routine.. 5634.23 BogoMIPS (lpj=11268466)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.304993] Security Framework v1.0.0 initialized
Aug 4 23:03:48 aldo-desktop kernel: [ 26.304999] SELinux: Disabled at boot.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305017] Mount-cache hash table entries: 512
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305169] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305178] monitor/mwait feature present.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305180] using mwait in idle threads.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305188] CPU: Trace cache: 12K uops, L1 D cache: 16K
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305191] CPU: L2 cache: 1024K
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305193] CPU: Hyper-Threading is disabled
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305196] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305207] Compat vDSO mapped to ffffe000.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305211] Remapping vsyscall page to ffffe000
Aug 4 23:03:48 aldo-desktop kernel: [ 26.305229] Checking 'hlt' instruction... OK.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.321005] SMP alternatives: switching to UP code
Aug 4 23:03:48 aldo-desktop kernel: [ 26.321209] Freeing SMP alternatives: 11k freed
Aug 4 23:03:48 aldo-desktop kernel: [ 26.321418] Early unpacking initramfs... done
Aug 4 23:03:48 aldo-desktop kernel: [ 26.621431] ACPI: Core revision 20060707
Aug 4 23:03:48 aldo-desktop kernel: [ 26.624660] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.628282] CPU0: Intel® Pentium® 4 CPU 2.80GHz stepping 01
Aug 4 23:03:48 aldo-desktop kernel: [ 26.628327] Total of 1 processors activated (5634.23 BogoMIPS).
Aug 4 23:03:48 aldo-desktop kernel: [ 26.629071] ENABLING IO-APIC IRQs
Aug 4 23:03:48 aldo-desktop kernel: [ 26.629387] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Aug 4 23:03:48 aldo-desktop kernel: [ 26.775875] Brought up 1 CPUs
Aug 4 23:03:48 aldo-desktop kernel: [ 26.776180] Booting paravirtualized kernel on bare hardware
Aug 4 23:03:48 aldo-desktop kernel: [ 26.776264] Time: 23:03:24 Date: 07/04/107
Aug 4 23:03:48 aldo-desktop kernel: [ 26.776295] NET: Registered protocol family 16
Aug 4 23:03:48 aldo-desktop kernel: [ 26.776394] EISA bus registered
Aug 4 23:03:48 aldo-desktop kernel: [ 26.776400] ACPI: bus type pci registered
Aug 4 23:03:48 aldo-desktop kernel: [ 26.782973] PCI: PCI BIOS revision 2.10 entry at 0xfba20, last bus=1
Aug 4 23:03:48 aldo-desktop kernel: [ 26.782976] PCI: Using configuration type 1
Aug 4 23:03:48 aldo-desktop kernel: [ 26.782978] Setting up standard PCI resources
Aug 4 23:03:48 aldo-desktop kernel: [ 26.790797] ACPI: Interpreter enabled
Aug 4 23:03:48 aldo-desktop kernel: [ 26.790802] ACPI: Using IOAPIC for interrupt routing
Aug 4 23:03:48 aldo-desktop kernel: [ 26.791348] ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.791357] PCI: Probing PCI hardware (bus 00)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.792095] PCI quirk: region 0400-047f claimed by vt8235 PM
Aug 4 23:03:48 aldo-desktop kernel: [ 26.792100] PCI quirk: region 0500-050f claimed by vt8235 SMB
Aug 4 23:03:48 aldo-desktop kernel: [ 26.792394] Boot video device is 0000:01:00.0
Aug 4 23:03:48 aldo-desktop kernel: [ 26.792456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 4 23:03:48 aldo-desktop kernel: [ 26.811812] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.812165] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.812524] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.812873] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.813181] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.813486] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.813793] ACPI: PCI Interrupt Link [LNK0] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.814099] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.814479] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.814858] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.815263] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.815643] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.817625] Linux Plug and Play Support v0.97 © Adam Belay
Aug 4 23:03:48 aldo-desktop kernel: [ 26.817636] pnp: PnP ACPI init
Aug 4 23:03:48 aldo-desktop kernel: [ 26.820864] pnp: PnP ACPI: found 13 devices
Aug 4 23:03:48 aldo-desktop kernel: [ 26.820871] PnPBIOS: Disabled by ACPI PNP
Aug 4 23:03:48 aldo-desktop kernel: [ 26.820927] PCI: Using ACPI for IRQ routing
Aug 4 23:03:48 aldo-desktop kernel: [ 26.820931] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 4 23:03:48 aldo-desktop kernel: [ 26.857904] NET: Registered protocol family 8
Aug 4 23:03:48 aldo-desktop kernel: [ 26.857907] NET: Registered protocol family 20
Aug 4 23:03:48 aldo-desktop kernel: [ 26.858296] pnp: 00:02: ioport range 0x400-0x47f could not be reserved
Aug 4 23:03:48 aldo-desktop kernel: [ 26.858300] pnp: 00:02: ioport range 0x500-0x50f has been reserved
Aug 4 23:03:48 aldo-desktop kernel: [ 26.858616] PCI: Bridge: 0000:00:01.0
Aug 4 23:03:48 aldo-desktop kernel: [ 26.858618] IO window: disabled.
Aug 4 23:03:48 aldo-desktop kernel: [ 26.858624] MEM window: ec000000-edffffff
Aug 4 23:03:48 aldo-desktop kernel: [ 26.858629] PREFETCH window: e0000000-e7ffffff
Aug 4 23:03:48 aldo-desktop kernel: [ 26.858650] PCI: Setting latency timer of device 0000:00:01.0 to 64
Aug 4 23:03:48 aldo-desktop kernel: [ 26.858675] NET: Registered protocol family 2
Aug 4 23:03:48 aldo-desktop kernel: [ 26.895637] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.895732] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.895851] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.895916] TCP: Hash tables configured (established 16384 bind 8192)
Aug 4 23:03:48 aldo-desktop kernel: [ 26.895919] TCP reno registered
Aug 4 23:03:48 aldo-desktop kernel: [ 26.907650] checking if image is initramfs... it is
Aug 4 23:03:48 aldo-desktop kernel: [ 27.499661] Freeing initrd memory: 7007k freed
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500333] audit: initializing netlink socket (disabled)
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500356] audit(1186268604.372:1): initialized
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500502] VFS: Disk quotas dquot_6.5.1
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500531] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500595] io scheduler noop registered
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500599] io scheduler anticipatory registered
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500601] io scheduler deadline registered
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500609] io scheduler cfq registered (default)
Aug 4 23:03:48 aldo-desktop kernel: [ 27.500918] isapnp: Scanning for PnP cards...
Aug 4 23:03:48 aldo-desktop kernel: [ 27.852138] isapnp: No Plug & Play device found
Aug 4 23:03:48 aldo-desktop kernel: [ 27.879115] Real Time Clock Driver v1.12ac
Aug 4 23:03:48 aldo-desktop kernel: [ 27.879182] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Aug 4 23:03:48 aldo-desktop kernel: [ 27.879307] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 4 23:03:48 aldo-desktop kernel: [ 27.880043] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Aug 4 23:03:48 aldo-desktop kernel: [ 27.880267] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 16
Aug 4 23:03:48 aldo-desktop kernel: [ 27.881309] 0000:00:06.0: ttyS1 at I/O 0xc028 (irq = 16) is a 8250
Aug 4 23:03:48 aldo-desktop kernel: [ 27.881781] 0000:00:06.0: ttyS2 at I/O 0xc040 (irq = 16) is a 8250
Aug 4 23:03:48 aldo-desktop kernel: [ 27.882085] 0000:00:06.0: ttyS3 at I/O 0xc050 (irq = 16) is a 8250
Aug 4 23:03:48 aldo-desktop kernel: [ 27.882155] Couldn't register serial port 0000:00:06.0: -28
Aug 4 23:03:48 aldo-desktop kernel: [ 27.882241] mice: PS/2 mouse device common for all mice
Aug 4 23:03:48 aldo-desktop kernel: [ 27.882865] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Aug 4 23:03:48 aldo-desktop kernel: [ 27.883155] input: Macintosh mouse button emulation as /class/input/input0
Aug 4 23:03:48 aldo-desktop kernel: [ 27.883195] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 4 23:03:48 aldo-desktop kernel: [ 27.883201] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 4 23:03:48 aldo-desktop kernel: [ 27.883462] PNP: PS/2 Controller [PNP0303 1-razz

S2K,PNP0f13 1-razz

S2M] at 0x60,0x64 irq 1,12
Aug 4 23:03:48 aldo-desktop kernel: [ 27.883741] serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 4 23:03:48 aldo-desktop kernel: [ 27.883746] serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 4 23:03:48 aldo-desktop kernel: [ 27.883869] EISA: Probing bus 0 at eisa.0
Aug 4 23:03:48 aldo-desktop kernel: [ 27.883907] EISA: Detected 0 cards.
Aug 4 23:03:48 aldo-desktop kernel: [ 27.914060] TCP cubic registered
Aug 4 23:03:48 aldo-desktop kernel: [ 27.914070] NET: Registered protocol family 1
Aug 4 23:03:48 aldo-desktop kernel: [ 27.914098] Using IPI No-Shortcut mode
Aug 4 23:03:48 aldo-desktop kernel: [ 27.914201] ACPI: (supports S0 S1 S4 S5)
Aug 4 23:03:48 aldo-desktop kernel: [ 27.914253] Magic number: 3:266:99
Aug 4 23:03:48 aldo-desktop kernel: [ 27.914904] Freeing unused kernel memory: 328k freed
Aug 4 23:03:48 aldo-desktop kernel: [ 27.917107] Time: tsc clocksource has been installed.
Aug 4 23:03:48 aldo-desktop kernel: [ 27.930228] input: AT Translated Set 2 keyboard as /class/input/input1
Aug 4 23:03:48 aldo-desktop kernel: [ 29.136467] Capability LSM initialized
Aug 4 23:03:48 aldo-desktop kernel: [ 29.169146] ACPI: Fan [FAN] (on)
Aug 4 23:03:48 aldo-desktop kernel: [ 29.172848] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
Aug 4 23:03:48 aldo-desktop kernel: [ 29.174605] ACPI: Thermal Zone [THRM] (48 C)
Aug 4 23:03:48 aldo-desktop kernel: [ 29.660496] usbcore: registered new interface driver usbfs
Aug 4 23:03:48 aldo-desktop kernel: [ 29.660526] usbcore: registered new interface driver hub
Aug 4 23:03:48 aldo-desktop kernel: [ 29.660552] usbcore: registered new device driver usb
Aug 4 23:03:48 aldo-desktop kernel: [ 29.661593] USB Universal Host Controller Interface driver v3.0
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662073] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662076] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662088] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662102] uhci_hcd 0000:00:10.0: UHCI Host Controller
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662339] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662370] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000cc00
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662482] usb usb1: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662513] hub 1-0:1.0: USB hub found
Aug 4 23:03:48 aldo-desktop kernel: [ 29.662521] hub 1-0:1.0: 2 ports detected
Aug 4 23:03:48 aldo-desktop kernel: [ 29.700126] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
Aug 4 23:03:48 aldo-desktop kernel: [ 29.768767] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Aug 4 23:03:48 aldo-desktop kernel: [ 29.768783] uhci_hcd 0000:00:10.1: UHCI Host Controller
Aug 4 23:03:48 aldo-desktop kernel: [ 29.768812] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Aug 4 23:03:48 aldo-desktop kernel: [ 29.768839] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d000
Aug 4 23:03:48 aldo-desktop kernel: [ 29.768936] usb usb2: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 29.768965] hub 2-0:1.0: USB hub found
Aug 4 23:03:48 aldo-desktop kernel: [ 29.768973] hub 2-0:1.0: 2 ports detected
Aug 4 23:03:48 aldo-desktop kernel: [ 29.808705] Floppy drive(s): fd0 is 1.44M
Aug 4 23:03:48 aldo-desktop kernel: [ 29.843697] FDC 0 is a post-1991 82077
Aug 4 23:03:48 aldo-desktop kernel: [ 29.876455] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Aug 4 23:03:48 aldo-desktop kernel: [ 29.876473] uhci_hcd 0000:00:10.2: UHCI Host Controller
Aug 4 23:03:48 aldo-desktop kernel: [ 29.876501] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Aug 4 23:03:48 aldo-desktop kernel: [ 29.876528] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000d400
Aug 4 23:03:48 aldo-desktop kernel: [ 29.876625] usb usb3: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 29.876655] hub 3-0:1.0: USB hub found
Aug 4 23:03:48 aldo-desktop kernel: [ 29.876663] hub 3-0:1.0: 2 ports detected
Aug 4 23:03:48 aldo-desktop kernel: [ 29.985813] VP_IDE: IDE controller at PCI slot 0000:00:11.1
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986246] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986250] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986262] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986278] VP_IDE: chipset revision 6
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986280] VP_IDE: not 100%% native mode: will probe irqs later
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986294] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986303] ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda 1-grin

MA, hdb

MA
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986316] ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc 1-grin

MA, hdd

io
Aug 4 23:03:48 aldo-desktop kernel: [ 29.986322] Probing IDE interface ide0...
Aug 4 23:03:48 aldo-desktop kernel: [ 30.011982] usb 1-1: new full speed USB device using uhci_hcd and address 2
Aug 4 23:03:48 aldo-desktop kernel: [ 30.217058] usb 1-1: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 30.403113] hda: ExcelStor Technology J840, ATA DISK drive
Aug 4 23:03:48 aldo-desktop kernel: [ 30.462862] usb 1-2: new low speed USB device using uhci_hcd and address 3
Aug 4 23:03:48 aldo-desktop kernel: [ 30.638952] usb 1-2: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 30.854008] hdb: HL-DT-ST RW/DVD GCC-4521B, ATAPI CD/DVD-ROM drive
Aug 4 23:03:48 aldo-desktop kernel: [ 30.881853] usb 2-1: new low speed USB device using uhci_hcd and address 2
Aug 4 23:03:48 aldo-desktop kernel: [ 30.910338] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 4 23:03:48 aldo-desktop kernel: [ 30.925177] Probing IDE interface ide1...
Aug 4 23:03:48 aldo-desktop kernel: [ 31.058601] usb 2-1: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 31.448484] usbcore: registered new interface driver hiddev
Aug 4 23:03:48 aldo-desktop kernel: [ 31.471756] input: 2-Axis,8-Button as /class/input/input2
Aug 4 23:03:48 aldo-desktop kernel: [ 31.471764] input: USB HID v1.10 Gamepad [2-Axis,8-Button ] on usb-0000:00:10.0-2
Aug 4 23:03:48 aldo-desktop kernel: [ 31.760850] hiddev96: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:10.1-1
Aug 4 23:03:48 aldo-desktop kernel: [ 31.760867] usbcore: registered new interface driver usbhid
Aug 4 23:03:48 aldo-desktop kernel: [ 31.760871] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Aug 4 23:03:48 aldo-desktop kernel: [ 31.791727] hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
Aug 4 23:03:48 aldo-desktop kernel: [ 32.128099] ide1 at 0x170-0x177,0x376 on irq 15
Aug 4 23:03:48 aldo-desktop kernel: [ 32.138225] SCSI subsystem initialized
Aug 4 23:03:48 aldo-desktop kernel: [ 32.144402] libata version 2.20 loaded.
Aug 4 23:03:48 aldo-desktop kernel: [ 32.146414] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
Aug 4 23:03:48 aldo-desktop kernel: [ 32.146418] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
Aug 4 23:03:48 aldo-desktop kernel: [ 32.146430] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 19
Aug 4 23:03:48 aldo-desktop kernel: [ 32.146544] eth0: VIA Rhine II at 0x1e400, 00:11:09:97 1-grin

0, IRQ 19.
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147258] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147355] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147367] ehci_hcd 0000:00:10.3: EHCI Host Controller
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147402] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147457] ehci_hcd 0000:00:10.3: irq 17, io mem 0xee002000
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147465] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147580] usb usb4: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147616] hub 4-0:1.0: USB hub found
Aug 4 23:03:48 aldo-desktop kernel: [ 32.147627] hub 4-0:1.0: 6 ports detected
Aug 4 23:03:48 aldo-desktop kernel: [ 32.156367] hda: max request size: 512KiB
Aug 4 23:03:48 aldo-desktop kernel: [ 32.166579] hda: 80418240 sectors (41174 MB) w/1719KiB Cache, CHS=16383/255/63
Aug 4 23:03:48 aldo-desktop kernel: [ 32.168455] hda: cache flushes supported
Aug 4 23:03:48 aldo-desktop kernel: [ 32.168522] hda: hda1 hda2 < hda5 hda6 hda7 >
Aug 4 23:03:48 aldo-desktop kernel: [ 32.222359] hdb: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Aug 4 23:03:48 aldo-desktop kernel: [ 32.222371] Uniform CD-ROM driver Revision: 3.20
Aug 4 23:03:48 aldo-desktop kernel: [ 32.270093] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Aug 4 23:03:48 aldo-desktop kernel: [ 32.510535] Attempting manual resume
Aug 4 23:03:48 aldo-desktop kernel: [ 32.510540] swsusp: Resume From Partition 3:7
Aug 4 23:03:48 aldo-desktop kernel: [ 32.510542] PM: Checking swsusp image.
Aug 4 23:03:48 aldo-desktop kernel: [ 32.521812] PM: Resume from disk failed.
Aug 4 23:03:48 aldo-desktop kernel: [ 32.550568] kjournald starting. Commit interval 5 seconds
Aug 4 23:03:48 aldo-desktop kernel: [ 32.550581] EXT3-fs: mounted filesystem with ordered data mode.
Aug 4 23:03:48 aldo-desktop kernel: [ 32.809179] usb 1-1: USB disconnect, address 2
Aug 4 23:03:48 aldo-desktop kernel: [ 33.048571] usb 1-1: new full speed USB device using uhci_hcd and address 4
Aug 4 23:03:48 aldo-desktop kernel: [ 33.254161] usb 1-1: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 33.257220] usb 1-2: USB disconnect, address 3
Aug 4 23:03:48 aldo-desktop kernel: [ 33.499468] usb 1-2: new low speed USB device using uhci_hcd and address 5
Aug 4 23:03:48 aldo-desktop kernel: [ 33.676055] usb 1-2: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 33.702934] input: 2-Axis,8-Button as /class/input/input3
Aug 4 23:03:48 aldo-desktop kernel: [ 33.702941] input: USB HID v1.10 Gamepad [2-Axis,8-Button ] on usb-0000:00:10.0-2
Aug 4 23:03:48 aldo-desktop kernel: [ 33.703024] usb 2-1: USB disconnect, address 2
Aug 4 23:03:48 aldo-desktop kernel: [ 33.942388] usb 2-1: new low speed USB device using uhci_hcd and address 3
Aug 4 23:03:48 aldo-desktop kernel: [ 34.124596] usb 2-1: configuration #1 chosen from 1 choice
Aug 4 23:03:48 aldo-desktop kernel: [ 34.415801] hiddev96: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:10.1-1
Aug 4 23:03:48 aldo-desktop kernel: [ 40.801557] eth0: link down
Aug 4 23:03:48 aldo-desktop kernel: [ 41.982233] NET: Registered protocol family 17
Aug 4 23:03:48 aldo-desktop kernel: [ 42.395904] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Aug 4 23:03:48 aldo-desktop kernel: [ 42.398421] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Aug 4 23:03:48 aldo-desktop kernel: [ 42.810279] irda_init()
Aug 4 23:03:48 aldo-desktop kernel: [ 42.810293] NET: Registered protocol family 23
Aug 4 23:03:48 aldo-desktop kernel: [ 43.052183] Linux agpgart interface v0.102 © Dave Jones
Aug 4 23:03:48 aldo-desktop kernel: [ 43.305543] input: PC Speaker as /class/input/input4
Aug 4 23:03:48 aldo-desktop kernel: [ 43.347971] agpgart: Detected VIA P4M266x/P4N266 chipset
Aug 4 23:03:48 aldo-desktop kernel: [ 43.352193] agpgart: AGP aperture is 64M @ 0xe8000000
Aug 4 23:03:48 aldo-desktop kernel: [ 43.426307] parport: PnPBIOS parport detected.
Aug 4 23:03:48 aldo-desktop kernel: [ 43.426414] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Aug 4 23:03:48 aldo-desktop kernel: [ 43.646573] input: PS/2 Generic Mouse as /class/input/input5
Aug 4 23:03:48 aldo-desktop kernel: [ 43.889398] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
Aug 4 23:03:48 aldo-desktop kernel: [ 43.889404] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Aug 4 23:03:48 aldo-desktop kernel: [ 43.889414] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
Aug 4 23:03:48 aldo-desktop kernel: [ 43.889559] PCI: Setting latency timer of device 0000:00:11.5 to 64
Aug 4 23:03:48 aldo-desktop kernel: [ 43.993914] usb 1-1: reset full speed USB device using uhci_hcd and address 4
Aug 4 23:03:48 aldo-desktop kernel: [ 44.163906] usbcore: registered new interface driver xpad
Aug 4 23:03:48 aldo-desktop kernel: [ 44.163913] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
Aug 4 23:03:48 aldo-desktop kernel: [ 44.164414] usbcore: registered new interface driver speedtch
Aug 4 23:03:48 aldo-desktop kernel: [ 44.259252] speedtch 1-1:1.0: found stage 1 firmware speedtch-1.bin
Aug 4 23:03:48 aldo-desktop kernel: [ 44.380940] speedtch 1-1:1.0: found stage 2 firmware speedtch-2.bin
Aug 4 23:03:48 aldo-desktop kernel: [ 44.580897] fuse init (API version 7.8)
Aug 4 23:03:48 aldo-desktop kernel: [ 44.603598] lp0: using parport0 (interrupt-driven).
Aug 4 23:03:48 aldo-desktop kernel: [ 44.629333] PPP generic driver version 2.4.2
Aug 4 23:03:48 aldo-desktop kernel: [ 44.685597] Adding 530104k swap on /dev/disk/by-uuid/e8574b8f-9dae-4e64-9629-2166a9b502a3. Priority:-1 extents:1 across:530104k
Aug 4 23:03:48 aldo-desktop kernel: [ 44.830713] EXT3 FS on hda6, internal journal
Aug 4 23:03:48 aldo-desktop kernel: [ 45.081518] NTFS driver 2.1.28 [Flags: R/O MODULE].
Aug 4 23:03:48 aldo-desktop kernel: [ 45.148505] NTFS volume version 3.1.
Aug 4 23:03:48 aldo-desktop kernel: [ 45.189974] NTFS volume version 3.1.
Aug 4 23:03:48 aldo-desktop kernel: [ 49.230405] ATM dev 0: ADSL line is synchronising
Aug 4 23:03:48 aldo-desktop kernel: [ 50.405515] Using specific hotkey driver
Aug 4 23:03:48 aldo-desktop kernel: [ 50.606059] input: Power Button (FF) as /class/input/input6
Aug 4 23:03:48 aldo-desktop kernel: [ 50.610540] ACPI: Power Button (FF) [PWRF]
Aug 4 23:03:48 aldo-desktop kernel: [ 50.644402] input: Power Button (CM) as /class/input/input7
Aug 4 23:03:48 aldo-desktop kernel: [ 50.648871] ACPI: Power Button (CM) [PWRB]
Aug 4 23:03:48 aldo-desktop kernel: [ 50.685333] No dock devices found.
Aug 4 23:03:48 aldo-desktop kernel: [ 50.700823] ibm_acpi: ec object not found
Aug 4 23:03:48 aldo-desktop kernel: [ 50.803843] pcc_acpi: loading...
Aug 4 23:03:54 aldo-desktop dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Aug 4 23:03:56 aldo-desktop dhcdbd: Started up.
Aug 4 23:03:56 aldo-desktop NetworkManager: <information>^Istarting...
Aug 4 23:03:56 aldo-desktop NetworkManager: <information>^Ieth0: Device is fully-supported using driver 'via-rhine'.
Aug 4 23:03:56 aldo-desktop NetworkManager: <information>^Inm_device_init(): waiting for device's worker thread to start
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: Found user 'avahi' (UID 105) and group 'avahi' (GID 111).
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: Successfully dropped root privileges.
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: avahi-daemon 0.6.17 starting up.
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: Successfully called chroot().
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: Successfully dropped remaining capabilities.
Aug 4 23:03:56 aldo-desktop avahi-daemon[4827]: chroot.c: open() failed: No such file or directory
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: Failed to open /etc/resolv.conf: Invalid argument
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: No service found in /etc/avahi/services.
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: Network interface enumeration completed.
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: Registering HINFO record with values 'I686'/'LINUX'.
Aug 4 23:03:56 aldo-desktop avahi-daemon[4826]: Server startup complete. Host name is aldo-desktop.local. Local service cookie is 1933121771.
Aug 4 23:03:56 aldo-desktop NetworkManager: <information>^Inm_device_init(): device's worker thread started, continuing.
Aug 4 23:03:56 aldo-desktop NetworkManager: <information>^INow managing wired Ethernet (802.3) device 'eth0'.
Aug 4 23:03:56 aldo-desktop NetworkManager: <information>^IDeactivating device eth0.
Aug 4 23:03:58 aldo-desktop kernel: [ 60.843916] ppdev: user-space parallel port driver
Aug 4 23:03:58 aldo-desktop hpiod: 1.7.3 accepting connections at 2208...
Aug 4 23:03:58 aldo-desktop kernel: [ 61.459660] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Aug 4 23:03:58 aldo-desktop kernel: [ 61.459666] apm: overridden by ACPI.
Aug 4 23:03:58 aldo-desktop hcid[5073]: Bluetooth HCI daemon
Aug 4 23:03:59 aldo-desktop kernel: [ 61.629346] Bluetooth: Core ver 2.11
Aug 4 23:03:59 aldo-desktop kernel: [ 61.629718] NET: Registered protocol family 31
Aug 4 23:03:59 aldo-desktop kernel: [ 61.629722] Bluetooth: HCI device and connection manager initialized
Aug 4 23:03:59 aldo-desktop kernel: [ 61.629727] Bluetooth: HCI socket layer initialized
Aug 4 23:03:59 aldo-desktop NetworkManager: <debug info>^I[1186286639.004877] nm_hal_device_added (): New device added (hal udi is '/org/freedesktop/Hal/devices/platform_bluetooth').
Aug 4 23:03:59 aldo-desktop hcid[5073]: Starting SDP server
Aug 4 23:03:59 aldo-desktop kernel: [ 61.663638] Bluetooth: L2CAP ver 2.8
Aug 4 23:03:59 aldo-desktop kernel: [ 61.663644] Bluetooth: L2CAP socket layer initialized
Aug 4 23:03:59 aldo-desktop kernel: [ 61.715837] Bluetooth: RFCOMM socket layer initialized
Aug 4 23:03:59 aldo-desktop kernel: [ 61.715946] Bluetooth: RFCOMM TTY layer initialized
Aug 4 23:03:59 aldo-desktop kernel: [ 61.715949] Bluetooth: RFCOMM ver 1.8
Aug 4 23:03:59 aldo-desktop anacron[5111]: Anacron 2.3 started on 2007-08-04
Aug 4 23:03:59 aldo-desktop anacron[5111]: Normal exit (0 jobs run)
Aug 4 23:03:59 aldo-desktop /usr/sbin/cron[5138]: (CRON) INFO (pidfile fd = 3)
Aug 4 23:03:59 aldo-desktop /usr/sbin/cron[5139]: (CRON) STARTUP (fork ok)
Aug 4 23:03:59 aldo-desktop /usr/sbin/cron[5139]: (CRON) INFO (Running @reboot jobs)
Aug 4 23:04:01 aldo-desktop kernel: [ 64.210364] ATM dev 0: ADSL line is up (192 kb/s down | 128 kb/s up)
Aug 4 23:04:05 aldo-desktop dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
Aug 4 23:04:10 aldo-desktop gconfd (aldo-5256): comenzando (versiÃ³n 2.18.0.1), pid 5256 usuario Â«aldoÂ»
Aug 4 23:04:10 aldo-desktop gconfd (aldo-5256): Se resolviÃ³ la direcciÃ³n Â«xml:readonly:/etc/gconf/gconf.xml.mandatoryÂ» a una fuente de configuraciÃ³n de sÃ³lo lectura en la posiciÃ³n 0
Aug 4 23:04:10 aldo-desktop gconfd (aldo-5256): Se resolviÃ³ la direcciÃ³n Â«xml:readwrite:/home/aldo/.gconfÂ» a una fuente de configuraciÃ³n escribible en la posiciÃ³n 1
Aug 4 23:04:10 aldo-desktop gconfd (aldo-5256): Se resolviÃ³ la direcciÃ³n Â«xml:readonly:/etc/gconf/gconf.xml.defaultsÂ» a una fuente de configuraciÃ³n de sÃ³lo lectura en la posiciÃ³n 2
Aug 4 23:04:10 aldo-desktop gconfd (aldo-5256): Se resolviÃ³ la direcciÃ³n Â«xml:readonly:/var/lib/gconf/debian.defaultsÂ» a una fuente de configuraciÃ³n de sÃ³lo lectura en la posiciÃ³n 3
Aug 4 23:04:10 aldo-desktop gconfd (aldo-5256): Se resolviÃ³ la direcciÃ³n Â«xml:readonly:/var/lib/gconf/defaultsÂ» a una fuente de configuraciÃ³n de sÃ³lo lectura en la posiciÃ³n 4
Aug 4 23:04:11 aldo-desktop dhclient: No DHCPOFFERS received.
Aug 4 23:04:11 aldo-desktop dhclient: No working leases in persistent database - sleeping.
Aug 4 23:04:11 aldo-desktop avahi-autoipd(eth0)[5263]: Found user 'avahi-autoipd' (UID 104) and group 'avahi-autoipd' (GID 110).
Aug 4 23:04:11 aldo-desktop avahi-autoipd(eth0)[5263]: Successfully called chroot().
Aug 4 23:04:11 aldo-desktop avahi-autoipd(eth0)[5263]: Successfully dropped root privileges.
Aug 4 23:04:11 aldo-desktop avahi-autoipd(eth0)[5263]: fopen() failed: Permission denied
Aug 4 23:04:11 aldo-desktop avahi-autoipd(eth0)[5263]: Starting with address 169.254.9.113
Aug 4 23:04:12 aldo-desktop kernel: [ 75.255757] NET: Registered protocol family 10
Aug 4 23:04:12 aldo-desktop kernel: [ 75.255860] lo: Disabled Privacy Extensions
Aug 4 23:04:12 aldo-desktop kernel: [ 75.255915] ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 4 23:04:14 aldo-desktop kernel: [ 77.472837] cdrom: hdb: mrw address space DMA selected
Aug 4 23:04:14 aldo-desktop kernel: [ 77.539644] cdrom: hdb: mrw address space DMA selected
Aug 4 23:04:15 aldo-desktop kernel: [ 77.690486] ISO 9660 Extensions: Microsoft Joliet Level 3
Aug 4 23:04:15 aldo-desktop kernel: [ 77.795979] ISO 9660 Extensions: Microsoft Joliet Level 1
Aug 4 23:04:15 aldo-desktop kernel: [ 77.798023] ISOFS: changing to secondary root
Aug 4 23:04:15 aldo-desktop kernel: [ 77.834195] ISO 9660 Extensions: RRIP_1991A
Aug 4 23:04:15 aldo-desktop gconfd (aldo-5256): Se resolviÃ³ la direcciÃ³n Â«xml:readwrite:/home/aldo/.gconfÂ» a una fuente de configuraciÃ³n escribible en la posiciÃ³n 0
Aug 4 23:04:16 aldo-desktop pppd[5344]: Plugin rp-pppoe.so loaded.
Aug 4 23:04:16 aldo-desktop pppd[5344]: In file /etc/ppp/peers/speedtch: unrecognized option 'nas0'
Aug 4 23:04:16 aldo-desktop avahi-autoipd(eth0)[5263]: Callout BIND, address 169.254.9.113 on interface eth0
Aug 4 23:04:17 aldo-desktop avahi-daemon[4826]: Joining mDNS multicast group on interface eth0.IPv4 with address 169.254.9.113.
Aug 4 23:04:17 aldo-desktop avahi-daemon[4826]: New relevant interface eth0.IPv4 for mDNS.
Aug 4 23:04:17 aldo-desktop avahi-daemon[4826]: Registering new address record for 169.254.9.113 on eth0.IPv4.
Aug 4 23:04:18 aldo-desktop NetworkManager: <information>^IUpdating allowed wireless network lists.
Aug 4 23:04:18 aldo-desktop NetworkManager: <WARNING>^I nm_dbus_get_networks_cb (): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - There are no wireless networks stored..
Aug 4 23:04:20 aldo-desktop avahi-autoipd(eth0)[5263]: Successfully claimed IP address 169.254.9.113
Aug 4 23:04:20 aldo-desktop avahi-autoipd(eth0)[5263]: fopen() failed: Permission denied
Aug 4 23:04:33 aldo-desktop ntpdate[5499]: can't find host ntp.ubuntu.com
Aug 4 23:04:33 aldo-desktop ntpdate[5499]: no servers can be used, exiting

Bienvenido!

llegasta a leer ésto: http://www.preguntaslinux.org/speedtouch...l#pid10697
sobre libatm (no se si ya lo actualizaron en linux-usb.org)

Si ya lo tengo instalado. Pero igual no funciona. Al parecer detecta la conexion pero no puede la puede utilizar.

Cita:

De messages.log

Aug 20 20:04:52 aldo-desktop kernel: [ 66.246485] ATM dev 0: ADSL line is up (1536 kb/s down | 512 kb/s up)
Aug 20 20:05:06 aldo-desktop pppd[5246]: Plugin rp-pppoe.so loaded.
Aug 20 20:05:13 aldo-desktop kernel: [ 87.258199] NET: Registered protocol family 10
Aug 20 20:05:13 aldo-desktop kernel: [ 87.258305] lo: Disabled Privacy Extensions
Aug 20 20:05:13 aldo-desktop kernel: [ 87.258364] ADDRCONF(NETDEV_UP): eth0: link is not ready
Aug 20 20:22:52 aldo-desktop gconfd (aldo-5402): comenzando (versiÃ³n 2.18.0.1), pid 5402 usuario Â«aldoÂ»
Aug 20 20:22:52 aldo-desktop gconfd (aldo-5402): Se resolviÃ³ la direcciÃ³n Â«xml:readonly:/etc/gconf/gconf.xml.mandatoryÂ» a una fuente de configuraciÃ³n de sÃ³lo lectura en la posiciÃ³n 0
Aug 20 20:22:52 aldo-desktop gconfd (aldo-5402): Se resolviÃ³ la direcciÃ³n Â«xml:readwrite:/home/aldo/.gconfÂ» a una fuente de configuraciÃ³n escribible en la posiciÃ³n 1
Aug 20 20:22:52 aldo-desktop gconfd (aldo-5402): Se resolviÃ³ la direcciÃ³n Â«xml:readonly:/etc/gconf/gconf.xml.defaultsÂ» a una fuente de configuraciÃ³n de sÃ³lo lectura en la posiciÃ³n 2
Aug 20 20:22:52 aldo-desktop gconfd (aldo-5402): Se resolviÃ³ la direcciÃ³n Â«xml:readonly:/var/lib/gconf/debian.defaultsÂ» a una fuente de configuraciÃ³n de sÃ³lo lectura en la posiciÃ³n 3
Aug 20 20:22:52 aldo-desktop gconfd (aldo-5402): Se resolviÃ³ la direcciÃ³n Â«xml:readonly:/var/lib/gconf/defaultsÂ» a una fuente de configuraciÃ³n de sÃ³lo lectura en la posiciÃ³n 4
Aug 20 20:22:56 aldo-desktop gconfd (aldo-5402): Se resolviÃ³ la direcciÃ³n Â«xml:readwrite:/home/aldo/.gconfÂ» a una fuente de configuraciÃ³n escribible en la posiciÃ³n 0
Aug 20 20:23:17 aldo-desktop kernel: [ 1169.252696] atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/serio0).
Aug 20 20:23:17 aldo-desktop kernel: [ 1169.252702] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
Aug 20 20:23:18 aldo-desktop kernel: [ 1169.430639] atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/serio0).
Aug 20 20:23:18 aldo-desktop kernel: [ 1169.430643] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
Aug 20 20:23:19 aldo-desktop kernel: [ 1170.487337] atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/serio0).
Aug 20 20:23:19 aldo-desktop kernel: [ 1170.487343] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
Aug 20 20:23:19 aldo-desktop kernel: [ 1170.661104] atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/serio0).
Aug 20 20:23:19 aldo-desktop kernel: [ 1170.661109] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
Aug 20 20:23:20 aldo-desktop kernel: [ 1171.380676] atkbd.c: Unknown key pressed (translated set 2, code 0xbb on isa0060/serio0).
Aug 20 20:23:20 aldo-desktop kernel: [ 1171.380682] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
Aug 20 20:23:20 aldo-desktop kernel: [ 1171.516568] atkbd.c: Unknown key released (translated set 2, code 0xbb on isa0060/serio0).
Aug 20 20:23:20 aldo-desktop kernel: [ 1171.516573] atkbd.c: Use 'setkeycodes e03b <keycode>' to make it known.
Aug 20 20:23:48 aldo-desktop gconfd (aldo-5402): Se ha recibido la seÃ±al 15, finalizando limpiamente
Aug 20 20:23:48 aldo-desktop gconfd (aldo-5402): Finalizando

Páginas: 1 2

ronaldo

p_eter

ronaldo

p_eter

ronaldo

p_eter

p_eter

Ptero-4

p_eter

ss4bm

p_eter

ss4bm